Cars brake pad: First you need to buy new brake pads. After this, to start the process, first you need to gather some necessary tools. The brake caliper is a metal cover that holds the brake pads. It is usually in the middle of the wheel. After changing the brake pads of the car, reinstall the caliper.
Gather the necessary tools
First you need to buy new brake pads. After this, to start the process, first you need to gather some necessary tools. To change brake pads at home, you will need a jack, jack stand, wheel chock, wrench, socket wrench, screwdriver, gloves and safety glasses.
Remove the wheel
Remove the nut on the wheel with the help of a wrench. After removing the nut, carefully remove the wheel and separate it from the vehicle.
Remove the pads from the brake caliper
The brake caliper is a metal cover that holds the brake pads. It is usually in the middle of the wheel. Loosen the bolt on the brake caliper and remove it gently. The old brake pads will be attached to the caliper. Use a screwdriver to remove them.
Insert the New Brake Pads
Make sure the new brake pads are facing the right way. Then, slide them onto the caliper and place them exactly like the old brake pads.
Reinstall the Wheel
After replacing the brake pads, reinstall the caliper. Make sure it is properly aligned. Install the bolts and tighten them. Then, in the next step, put the wheel back on and tighten the nuts. Lower the jack once done.
Drive your car slowly in open areas and check if the brakes are working properly at different speeds. This way you can change brake pads from home.
